Cannot find driver updates for HP Pavilion p6-2010scm

November 3, 2015, 4:47 am

≫ Next: Sound turns off after a few minutes. Reboot brings back the sound, but only for a short time

≪ Previous: Black screen

$

0

0

I am looking for updated graphics drivers for my HP Pavilion p6-2010scm. It doesn't appear to be listed in the service pages and I'm wondering where I can find them from, or if I can use a driver from a different source. Below is the system information output. Any help you can give me would be appreciated.

 

 

------------------
System Information
------------------
Time of this report: 11/3/2015, 11:38:18
Machine name: HETA-HP
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150928-1507)
Language: Finnish (Regional Setting: Finnish)
System Manufacturer: Hewlett-Packard
System Model: p6-2010scm
BIOS: Ver: HOL_706.ROM vHOL7.06
Processor: AMD A6-3600 APU with Radeon(tm) HD Graphics (4 CPUs), ~2.1GHz
Memory: 4096MB RAM
Available OS Memory: 4082MB RAM
Page File: 3212MB used, 4950MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: AMD RADEON HD 6450
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x6779)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6779&SUBSYS_90971B0A&REV_00
Display Memory: 2797 MB
Dedicated Memory: 1012 MB
Shared Memory: 1785 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: HP 2211 Series Wide LCD Monitor
Monitor Model: HP 2211
Monitor Id: HWP2936
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1077 (English)
Driver Version: 8.851.0.0
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 6/1/2011 20:01:32, 795648 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-2439-11CF-8F7C-9DB0BEC2C535}
Vendor ID: 0x1002
Device ID: 0x6779
SubSys ID: 0x90971B0A
Revision ID: 0x0000
Driver Strong Name: oem10.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_NI:8.851.0.0ci\ven_1002&dev_6779&subsys_90971b0a
Rank Of Driver: 00E60001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

---

Sound turns off after a few minutes. Reboot brings back the sound, but only for a short time

November 1, 2015, 11:12 pm

≫ Next: HP L2335 OSD Menu is popping up every minute or so.

≪ Previous: Cannot find driver updates for HP Pavilion p6-2010scm

$

0

0

The problem started yesterday, all of the sudden there was no sound. I have checked with the web, the hp support assistant and downloaded new drivers.  I can't think of anything else to do. I have even downloaded programs to check my system in case something got past norton or my malware.  Still no luck, so before I call Sam's club about my warranty I thought I would check here for an answer.

 

I bought the machine brand new a year ago last May (2014), never had any problems with it until now.  I don't even get sound from the pc speakers.  All the power and connects for my speakers are working just fine.

 

I hope somone can help me out.

 

Thanks,

Miriah

HP L2335 OSD Menu is popping up every minute or so.

November 3, 2015, 9:19 am

≫ Next: HP Pavilion 25BW Monitor Blacks out

≪ Previous: Sound turns off after a few minutes. Reboot brings back the sound, but only for a short time

$

0

0

Hi

 

My trusty L2335 has suddenly developed and issue with the osd popping up. 

 

I have checked the front panel button board and all the switches seem to be fine. 

 

IE Multi meter is showing the circuit closed on every button until the button is pressed. 

 

I've yet to check the cable between the button pcb and the main pcb. 

 

Any other ideas? 

 

The monitor works fine with the button PCB disconnected but obviously I have no control over the setup/options ect. 

HP Pavilion 25BW Monitor Blacks out

November 3, 2015, 10:19 am

≫ Next: can i use my computer as a show monitor ?

≪ Previous: HP L2335 OSD Menu is popping up every minute or so.

$

0

0

My HP Pavilion 25BW monitor balcks out after a few minutes of use. I run multiple monitors on my computer, and this happens regardless of the connection or if I run this monitor by itself. After the monitor blacks out, the power button remains lit, but I cannot power the monitor off by holding the power button on. If I disconnect the power from the monitor, then reconnect it, the monitor displays properly again for a few more minutes, until it blacks out again.  Any suggestions?

can i use my computer as a show monitor ?

October 30, 2015, 7:02 pm

≫ Next: 27xw monitor flashing off and on

≪ Previous: HP Pavilion 25BW Monitor Blacks out

$

0

0

Hello ,

first i wanna hang my xbox to my computer .. ( use my computer like a show monitor ) 
althoug my computer doesn't have any port to video cable ..
i see cable called ( USB male to RCA female ) like that on the picture .
and now i can connect that xbox to my computer .. but i didn't make that till i sure that true ..
first ,
is that posible .. to make that xbox use my computer screen ?
if yes .. what should i do .. is there programs ,, drivers needed ??

 
please , can you explain .. what that cable use for ? 

thanks all ,,

 

27xw monitor flashing off and on

November 3, 2015, 11:31 am

≫ Next: Thin Clients t520 screen resolution not applying to all users?

≪ Previous: can i use my computer as a show monitor ?

$

0

0

same monitor, same problem... Any solution?

Thin Clients t520 screen resolution not applying to all users?

November 3, 2015, 3:38 pm

≫ Next: audio input mike

≪ Previous: 27xw monitor flashing off and on

$

0

0

I am a very entry level tech working for one of the many boards of developmental disabilities in Ohio. We run a terminal server farm in which all users log on via thin client. I wish I could give more detail, but I am very new and I have a boss who never explains everything. The problem I am encountering is when I change the screen resolution as the administrator it does not apply to any of the users. I disable the write when I do it, and I can see it on the administrator profile, but none of the users. If someone can help with this problem I would be extremely appreciative.

audio input mike

November 3, 2015, 4:26 pm

≫ Next: video game problem

≪ Previous: Thin Clients t520 screen resolution not applying to all users?

$

0

0

My new PC does not have an input jack to connect a mic into it.

How do I get audio or voice into the compute

 

Please cancle this post as I found it.

Frank 36

---

video game problem

November 3, 2015, 7:33 pm

≫ Next: Vram help

≪ Previous: audio input mike

$

0

0

I'm having problems with video games on my pc which driver do you think could be at fault.Also i could not update the PCI data acquisition and signal processing controller.I've tried the chipset soultion but its not working

Vram help

November 3, 2015, 7:36 pm

≫ Next: Surface Pro 3 and HP S231d drivers - Windows 10 x64

≪ Previous: video game problem

$

0

0

the vram of the pc is quite low is there anyway i could upgrade it?

Surface Pro 3 and HP S231d drivers - Windows 10 x64

November 4, 2015, 1:20 am

≫ Next: screen resolution for 2nd monitor on ATI Radeon 5570

≪ Previous: Vram help

$

0

0

Hi,

 

I got an issue with Surface Pro 3 and HP S231d monitor.

When I install the latest drivers from S231d and I connect directly with USB, it asks for a restart.
When the OS is restarting, it returns a OS error and ask for repair (it can't be solved with the defaults tools)

 

I installed the latest firmware for the Surface with no solution. Also I tried with diferents Surfaces.

The OS is Win10 x64.

 

Any help would be greatly appreciated.

 

Thanks

 

screen resolution for 2nd monitor on ATI Radeon 5570

November 4, 2015, 10:25 am

≫ Next: New video Card not working.

≪ Previous: Surface Pro 3 and HP S231d drivers - Windows 10 x64

$

0

0

I have a HP Pavilion Elite HPE 360z with an ATI Radeon 5570 installed.

I have a 1st monitor connected at the display port at 2560x1440 and an identical monitor at the HDMI output but donlt get anything better than 1920x1080.

 

What do I need to do to get the 2560x1440 resolution on my 2nd screen?

 

model: HPE 360z

product# WX520AV#ABA

sn: (removed content)

 

 BR

Steffen

New video Card not working.

November 4, 2015, 1:38 pm

≫ Next: speakers not working

≪ Previous: screen resolution for 2nd monitor on ATI Radeon 5570

$

0

0

Hey,

 

I recently purchased a new Graphics Card, however it doesn't seem to run in my PC. I also purchased a new 600W PSU to power this card and my computer.

 

The card I purchased is:

 

Radeon Sapphire Nitro R9 380 4GB.

 

PSU: Corsair CX600M

 

According to the specs on my PC VIA HP site, I didn't see any reason the card should not work with a PSU strong enough to run it. Originally I had a 550W PSU and upon power up the PC, the CPU fan would come on, however the fans for the graphics card would start then stop and start then stop continuously. I assumed at that point it must be a power issue as it seemed the graphics card was not getting enough power (I had purchased a lower brand PSU). This is what promted me to to get a more power PSU, and upon reading various forums regarding the R9 380 and PSU quality, i figured Corsair was the way to go.

 

As I said though still not working, actually the exact same thing hapenning. Fans come on then off. Now the strange thing is, when I take the RAM out of the PC, I get the ram warning beep of course, but everything powers on properly.

 

Any ideas at all would be great!

 

I have also already gone through one Graphics Card as the company deemed it DOA because my motherboard would not post. But since this is a completely different card, I am starting to think the issue may be with my PC itself.

speakers not working

November 3, 2015, 5:45 pm

≫ Next: No onboard video

≪ Previous: New video Card not working.

$

0

0

Internal Speakers with B&O sound not working

No onboard video

November 4, 2015, 3:35 pm

≫ Next: Grafics card upgrade

≪ Previous: speakers not working

$

0

0

When I add a PCIE video card I loose my onboard video

---

Grafics card upgrade

November 4, 2015, 10:21 pm

≫ Next: adding another monitor

≪ Previous: No onboard video

$

0

0

I looked at the spec sheet here at HP it don't match to the video specs. mine has the Intel (R) HD grafics 4600 and nivida Geforce 830A, can this system be upgraded, if so what kind of grafics card i can use ?

adding another monitor

November 5, 2015, 4:57 am

≫ Next: No sound? HELP!

≪ Previous: Grafics card upgrade

$

0

0

How can I add another monitor to my computer?  Thanks

No sound? HELP!

November 5, 2015, 7:55 am

≫ Next: looking for dvd driver software

≪ Previous: adding another monitor

$

0

0

I just got this desktop all in one HP Pavilion about two weeks ago, yesrday after installing some updates the sound just stopped working. Nothing is coming out of the speakers at all. Not even the start-up sounds. one of my updats failed to install... That's the only think I could think of that may have caused the problem. But I don't know a thing about computers so I'm really stuck and frustrated on what to do.

 

Thank you for your time!

-Hope

looking for dvd driver software

November 5, 2015, 9:00 am

≫ Next: audio

≪ Previous: No sound? HELP!

$

0

0

hello

 

         I have recently reloaded windows for my Pavalion P7- 1420t dsktop pc.   My computer is out of warrentee but atfer speaking to Hp  technical  support they infromed me that I need to download my own  drivers so I can burn  my own cd / dvd's. 

 

         I am looking for free but excellent driver software   to burn a video which I have  saved  on my computer on to Dvd disk.  I    would also  like to add when I purchased this computer it came as  windows 8 but for some reason it updated itself to windows 8.1 after reloading windows.   In regards can anyone please suggest a free and excellent  cd dvd driver software that will work for me.  I believe but not certain my dvd drive can burns both cd and dvd's.    thank you 

audio

November 5, 2015, 9:42 am

≫ Next: black lines across screen are growing

≪ Previous: looking for dvd driver software

$

0

0

i have a hp envy i logged on to my laptop the other day and noticed my audion wasnt working i have clicked the audio button to scan the problem, it comes back woth troubleshoot couldnot detect the problem. i click othr options and it says for me to reset my laptop i dont want to do this as i have things that i have downloaded that i will have to download again. please help.