I have a new Pav 500-100a factory standard with no mods. A HP w2207 monitor.
Currently connect fine with VGA to the DVI-D port with the adapter that came with the pc. I've setup Windows, updated to 8.1, put in my files from my old PC and all was well except video isnt that good.
I got a DVD cable form work but its a DVI-I cable. It took 5 mins before windows comes up and then whenever the background picture changed in the theme it hung for a few seconds. I read that I need a DVD-D cable which i purchasd today.
The packet says its a CL-DVI2M - DVI M/M 24+1 CABLE 2M. The tech in the shop says its a good calbe and will work fine.
When connected and I power up I get teh hp logo and rolling dots then it goes blank.
I reconnect teh VGA cable and its all fine - using the VGA to DVI adapter.
I ran msconfig and turned of safe boot - restarts and comes up fine in safe mode. I set the resolution to 1280x800 and restarted and reconnected the DVI cable - blank again.
If I put the VGA cable back in it boots fine. The monitor has been factory reset and seens the DVI connection but Windows remains blank. Also tried booting first with no cable - connect teh DVI and the monitor remains in sleep - power reset teh monitor and still blank also shows no DVO conenction.
I fI power up with DVI connected I can get to BIOS, and i see the HP logo and dots as Win 8 starts.
I dont know what else I can try. I have no other usable video card with DVI
Any ideas out there?
Pls help - Steve