The sound through the speakers i have is no better than sound you would get through a monitor. I have used these speakers on my previous computer, ( HP PRo 3500 series Mt running windows 7 pro. 32bit), and the sound was very good.
The sound is in stereo but flat, no seperation of bass, treble etc. These are the driver dtails, version: 8.65.186.52 dated 5/16/17. Any help would be greatly appreciated. Thanks...
I am having the same problem with my HP-Envy Pro Curved All-inOne PC (34").. HELP!!! HP sent a technician and they replaced my computer, they said it was the speakers... now about 6 months later, it is happening to this new one!!
Even with the sound OFF.. the popping continues. it never stops..
HELP!!!!!!!!!!!!!!!!!!!!!!!
Hello Folks,
What should be a 15 min job has turned into a big forray with this PC. Firstly the card was installed in 2 other desktops and had no problems. One with Win 10 pro x64, the other Windows 7x64.
I have this desktop - HP Pavilion 500-119ea. It came with Windows 8, without any video or other cards. Onboard audio was bad so now I am running Win7 X64. This is a fresh install with all drivers, chipset and display working correctly.
I installed a creative labs rx PCIx1 audio card into what are 3 availble smaller PCIx1 slots. I tried slot 1,2,3 and the x16 slot. I can not get any sound from the card. Tried every port on it with a few headphones, made sure the normal 'Speakers' was set as audio default, checked and triped checked volume levels in numerous area's of windows. I usually use Foobar and this frankly won't play audio files (any type) other media players will play but no audio. Once I see that Foobar2000 wasn't functioning I put this down soley to the HP desktop, what with it's bare bones bios there is not many options.
Obviously, The Winx64 is installed and setup correctly, the card is regonized and on screen all looks good. No problems in the device manager. The drivers are the lastest standand drivers from creative labs for x64 Windows, including 7.
I disabled the onboard audio in Bios setup, there are no onboard audio drivers installed. The device/bus options are all available.
On inspection, the spdif light is off on the card, trying to switch it on in windows makes no difference. It looks that the slots on this MSI made 'Jasmine' board seem to have no power?
Anyway I am currently at a loss, hoping some person has a solution. I updated to the lastest Bios available for the PC - which is: 80.51 Rev.A, Legacy support is switched on. I turned off Virtualization security option. Still no audio!
Thanks,
Thom.
This message relates to my attempts at problem solving on my Compaq dx2000MT, s/n HUB44406CW. I realise it is well out of warranty (almost a museum piece by now!) but it serves my purpose very well although I’ve had to change the OS to Windows 7 Pro; Microsoft would not let me reactivate XP Pro. Apart from the absence of Aero (no problem) it works fine but I had a few problems with drivers, mostly solved.
The remaining problem I have is a total absence of audio output following the change of OS from XP to Windows 7. Because the AC97 driver appeared to be missing I downloaded Realtek v 6.0.1.6305 and installed it. Device Manager says it’s working OK but I still don’t have any audio, either from the internal speaker or either of the 3.5mm jacks – this despite the Desktop icon showing audio present, it can be muted and indicated level changed. Question: Is this the correct driver or which one should I be using? HP Support doesn't list Windows 7 for this PC.
3-in-1 Diagnostics USB Key won’t work on my PC; is there any other diagnostic aid which would identify (and solve) this problem?
Any assistance will be welcomed.
Have external speaker plugged into the back no sound coming from. also tried plugging in headphones to the top and still no sound coming out. Also at bottom of screen is a speaker icon with a red x, when I put my cursor over it it says "no speakers or headphones are plugged in", When they are. Only get sound with a bluetooth wireless connection.
I have 1 mic/headphone connector on my all in one desktop.
I want to plug my amp in, so I can record it the sound along with the sound of an youtubemovie from my computer and I want to listen to both of these sounds playing together on my headphone at the same time.
question 1 -How can I achieve this: Do I need an jack split cable or an audio adapter?
question 2- Is the mic/headphone connector trrs?
Can anybody help me out?
help
i have always had the realtek manager up to a month agao now i have the realtek adio properties box but no manager ..
i have downloaded the most recent driver ..there is no 'unknown anythings' in my device manager
i am at a loss ...
i would try and install it from scratch again but i no longer have a hp recovery sinse windows 10
i am hoping you can help me get it back ..please
on Sept 13 , new windows update , audio quit working , contol panel - systems - audio corrupted
have down loaded several audio drivres for this desktop from HP site, have paid for HP Care -Smart friends
to also do same, no success by my efforts or on line w HP tech support for 4 hours , problem still exist . HP case #500 384 1540. ANy other ideas on how to fix this ? is this a WIN 10 OS problem you cannot fix?
I am trying to find a specific audio cable the goes from the back of the tower to the external speakers. In the photo provided, i need the exact lime green 3.5mm connector, Male to Male of course. I have searched for hours trying to find this exact cable to buy without success. Can anyone please help me with this?
I have never used the headphone jack to the left of this all-in-one. I would like a way to input audio and hear it on my computer's beats audio system. Or use a Windows App to record voice using an external microphone. This should be simple, right? But I am findiing it very hard to seup a microphone. Firstly, I am not sure if the input jack for microphone is the same as the headphone jack! Can you please help me to setup external microphone. I have tried but it says the IDT High Definition Audio is not availale for microphone. Also, when I run trouble shooter for microphone setup it says the microphone is not plugged in. Actually it is plugged in. Can you please help.
I recently bought a the HP Pavilion cb060sa and i realised straight away after plugging in my headphones that there is a background humming/stuttering noise which is constantly audible with the headphones plugged in, and even in the background of videos or music it will still be audible (but very faint). How can I fix this issue?
My Slimline Desktop does not have any sound. If I hook up a speaker I get sound, but I thought the system had built in speakers, How do I tell?
After windows 10 automatic updates, than on tesk bar, sound icon with a red circle cross and also said the device AMD high definition decice not plug in, also lose and cannot see any spearker or codecac.
Attempted reinstalled AMD redon HDMI driver, attempted realtek reinstell driver, attempted set msconfig to max REM, still nothing work.
Also, my window is window 10 64 bite, do kown how the realtek driver still 32 bite. ( even it said to window 10) I think all window 10 is 64 bite.
I reset my computer and cannot get audio to work. IDT high definition audio code c. Downloadedfrom driver 6.10.64860. Came up with error code 0x8007001f
My beats audio software is gone after upgrade to windows 10 from 7. Beats audio drivers for windows 10 ??? - HP Support Forum - 5715089
IDT High-Definition (HD) Audio.... In device manager i have this one i seen posted for the fix for someone. I want the Beataudio software that always me to add to and change outputs and it also has a egualizer and sound enhancement i could add. must i restore to Win7 to get this back. Please help
Help, No sound out of my HP w2207 monitor speakers?? They where working last week before updates. Under Device Manager there is a yellow mark that says, Multi Media Audio Controller. I tried to update driver, but I guess I'm not getting the right one?? THANKS IN ADVANCE!!
Hi, for a while I can't get any sound to come through my headphone jack in front on the CPU. I've tried two different sets of headphones that have a 3 pin connector. I think it's a driver issue because I can hear sound through the green Line Out located in the back of the computer with headphones and external speakers.
Troubleshooting steps that I've tried are: uninstalling and reinstalling the IDT High Definition CODEC driver, making sure "Speakers/Headphones" is the default device, ran the Sounds troubleshooter to fix the problem, ran the HP Diagnostics tool before startup and the audio test worked fine from the speakers and front headphone jack on CPU.
I did get a message about the "Generic Audio Driver" not working properly in the troubleshooter for audio with a yellow caution triangle. I was thinking about trying to update the BIOS but I didn't see a BIOS update on the drivers download page for my desktop model or resetting the BIOS to factory default.
Any other suggestions on how to fix this driver issue would be great. Thanks
System Information:
BIOS revision: JA2 v.80.46
BIOS date: 10/3/2013
Windows 10 was reinstalled and now my Altec Lansing Series 100 speakers do not work. It shows no audio device installed and there is no driver.
I just need the driver for the Altec Lansing Series 100 speakers. Thanks.
I have bought a speaker (HP S3100) which is not supporting on Ubuntu 14.04 operating system (linux). Please help me so that I can enjoy the product.
